Changing Security Settings - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
Figure 43 Create Security Key
4. Either use the default security key identifier, or enter a new security key identifier.
5. Either click Suggest to ask the system to create a security key, or you can enter a new security key.
6. Reenter the new security key to confirm it.
The security key is case sensitive. It must be between 8 and 32 characters and contain at least one number, one
lowercase letter, one uppercase letter, and one nonalphanumeric character (for example, < > @ +). The space
character is not permitted.
4.9.2

Changing Security Settings

Perform the following steps to change the encryption settings for the security key identifier, security key, and
password.
1. In the VD Mgmt screen, navigate to the controller, and press the F2 key.
2. Navigate to Drive Security, and press Enter.
3. Select Change Security Settings, and press Enter.
The Change Security Key dialog appears.
NOTE After you create a security key, the Enable Security option is disabled.
This option is reenabled only after you delete the existing key.
CAUTION If you forget the security key, you lose access to your data. Be sure
to record your security key information. You might need to enter the
security key to perform certain operations.
NOTE Non-U.S. keyboard users must be careful not to enter double-byte
character set (DBCS) characters in the security key field. The firmware
works with the ASCII character set only.
LSI Corporation
- 69 -
Chapter 4: Ctrl-R Utility
LSI SafeStore Encryption Services