Changing A Virtual Drive Configuration - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
Figure 167 Set Virtual Drive Properties Dialog
3. Change the virtual drive properties as required.
For information about these properties, see
4. Click Ok to accept the changes.
The virtual drive settings are updated.
9.8

Changing a Virtual Drive Configuration

You can use the Modify Drive Group wizard in the MegaRAID Storage Manager software to change the configuration
of a virtual drive by adding drives to the virtual drive, removing drives from it, or changing its RAID level.
Selecting Virtual Drive Settings.
LSI Corporation
- 278 -
Chapter 9: Configuration
Changing a Virtual Drive Configuration