Display The Bad Block Table; Clear The Ldbbm Table Entires; Foreign Configurations Commands - Lenovo ThinkServer RD650 User Manual
12 gb/s megaraid sas
Hide thumbs
Also See for ThinkServer RD650:
- User manual and hardware maintenance manual (262 pages) ,
- Operating system installation manual (122 pages) ,
- User manual (226 pages)
Table of Contents
Advertisement
12Gb/s MegaRAID SAS Software User Guide
March 2014
storcli /c0/v0 show expansion
6.6.4.12
Display the Bad Block Table
The Storage Command Line Tool supports the following command to check for bad block entries of virtual drives on
the selected controller:
storcli /cx/vx show bbmt
Input example:
storcli /c0/v0 show bbmt
6.6.4.13
Clear the LDBBM Table Entires
The Storage Command Line Tool supports the following command to clear the LDBBM table entries:
storcli /cx/vx delete bbmt
Input example:
storcli /c0/v0 delete bbmt
6.6.5
Foreign Configurations Commands
The Storage Command Line Tool supports the following commands to view, import, and delete
foreign configurations:
storcli /cx/fall|fall del|delete [ securitykey=sssssssssss ]
storcli /cx/fall|fall import [preview][ securitykey=sssssssssss ]
storcli /cx/fall|fall show [all] [ securitykey=sssssssssss ]
The detailed description for each command follows.
storcli /cx/fall|fall del| delete [ securitykey=sssssssssss ]
This command deletes the foreign configuration of a controller. Input the security key if the controller is secured.
Input example:
storcli /c0/fall delete
storcli /cx/fall|fall import [preview] [ securitykey=sssssssssss ]
This command imports the foreign configurations of a controller. The preview option shows a summary of the
foreign configuration before importing it.
Input example:
storcli /c0/fall import
storcli /cx/fall|fall show [all][ securitykey=sssssssssss ]
This command shows the summary of the entire foreign configuration for a particular controller. The all option
shows all the information of the entire foreign configuration.
Input example:
NOTE
Provide the security key when importing a locked foreign
configuration created in a different machine that is encrypted with a
security key.
NOTE
The EID:Slot column is populated for the foreign PDs that are locked.
LSI Corporation
- 189 -
Chapter 6: StorCLI
Working with the Storage Command Line Tool
Advertisement
Table of Contents
