Lenovo ThinkServer RD650 User Manual page 369

12Gb/s MegaRAID SAS Software User Guide
March 2014
Number
0x0152 Information
0x0153 Information
0x0154 Information
0x0159 Critical
0x015a Information
0x015b Information
0x015c Critical
0x015d Information
0x015e Information
0x015f Information
0x0160 Information
0x0161 Information
0x0162 Fatal
0x0163 Information
0x0164 Information
0x0165 Warning
0x0166 Critical
0x0167 Warning
0x0168 Critical
0x0169 Critical
0x016a Warning
0x016b Critical
0x016c Information
0x016d Information
0x016e Critical
0x016f Information
0x0170 Warning
Severity
Event Text
Level
Controller requests a host bus rescan Logged when controller requested a host bus rescan.
Controller repurposed and factory
defaults restored
Drive security key binding updated
Controller encountered a fatal error
and was reset
Snapshots enabled on %s
(Repository %s)
Snapshots disabled on %s
(Repository %s) by the user
Snapshots disabled on %s
(Repository %s), due to a fatal error
Snapshot created on %s at %s
Snapshot deleted on %s at %s
View created at %s to a snapshot at
%s for %s
View at %s is deleted, to snapshot at
%s for %s
Snapshot rollback started on %s
from snapshot at %s
Snapshot rollback on %s internally
aborted for snapshot at %s
Snapshot rollback on %s completed
for snapshot at %s
Snapshot rollback progress for
snapshot at %s, on %s is %s
Snapshot space for %s in snapshot
repository %s, is 80%% full
Snapshot space for %s in snapshot
repository %s, is full
View at %s to snapshot at %s, is
80%% full on snapshot repository %s
View at %s to snapshot at %s, is full
on snapshot repository %s
Snapshot repository lost for %s
Snapshot repository restored for %s Logged when snapshot repository was restored for a LD.
Snapshot encountered an
unexpected internal error: 0x%lx
Auto Snapshot enabled on %s
(snapshot repository %s)
Auto Snapshot disabled on %s
(snapshot repository %s)
Configuration command could not
be committed to disk, please retry
COD on %s updated as it was stale
Power state change failed on %s
(from %s to %s)
Generic Conditions when Each Event Occurs
Logged when controller repurposed and factory defaults
were restored.
Logged when drive security key binding was updated.
Logged when a controller encountered a fatal error and was
reset.
Logged when snapshot was enabled on a LD.
Logged when snapshot was disabled on a LD by the user.
Logged when snapshot was disabled on a LD due to a fatal
error.
Logged when snapshot was created on a LD.
Logged when snapshot was deleted on a LD.
Logged when view was created at a LD.
Logged when View at a LD was deleted
Logged when snapshot rollback was started on a LD.
Logged when snapshot rollback was internally aborted.
Logged when snapshot rollback on a LD was completed.
Logged to report snapshot rollback progress on a LD.
Logged when snapshot space for a LD in a snapshot
repository was 80% full.
Logged when snapshot space for a LD in a snapshot
repository was full.
Logged when view at a LD to a snapshot was 80% full on a
snapshot repository.
Logged when view at a LD to a snapshot was full on a
snapshot repository.
Logged when snapshot repository was lost for a LD.
Logged when snapshot encountered an unexpected internal
error.
Logged when auto snapshot was enabled.
Logged when auto Snapshot was disabled.
Logged when configuration command could not be
committed to disk and was asked to retry.
Logged when COD in DDF is updated due to various reasons.
Logged when power state change failed on a PD.
LSI Corporation
- 369 -
Appendix A: Events and Messages