Imm Error Messages - Lenovo BladeCenter HS23E Problem Determination And Service Manual

IMM error messages

Use this information to resolve IMM error messages.
The following table lists IMM error messages and suggested actions to correct the
detected problems. Deassertive events not listed in this table are informational
only.
Notes:
v Error Code = IMM events displayed by AMM (for example, Service Advisor,
v Event ID = IMM events displayed by DSA diagnostic program (for example, in
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v See Chapter 4, "Parts listing," on page 41 to determine which components are consumable, structural, or CRU
parts.
v If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
Error Code Event ID
0x80010200 80010202-0701ffff
0x80010200 80010202-0701ffff
128
BladeCenter HS23E Type 8038 and 8039: Problem Determination and Service Guide
AMM web interface)
the Chassis Event Log section)
Type Error Message
Error System board
(SysBrd 3.3V)
voltage (lower
critical) has
asserted.
Error System board
(SysBrd 5V) voltage
(lower critical) has
asserted.
Action
1. Remove all expansion cards from the
blade server (see "Removing an I/O
expansion card" on page 71).
2. Remove all storage drives from the blade
server (see "Removing a hot-swap
storage drive" on page 63).
3. If the error still occurs, replace the
system-board assembly (see "Removing
the system-board assembly" on page 90
and "Installing the system-board
assembly" on page 91).
1. Remove all expansion cards from the
blade server (see "Removing an I/O
expansion card" on page 71).
2. Remove all storage drives from the blade
server (see "Removing a hot-swap
storage drive" on page 63).
3. If the error still occurs, replace the
system-board assembly (see "Removing
the system-board assembly" on page 90
and "Installing the system-board
assembly" on page 91).