Lenovo ThinkServer RD650 User Manual page 394

12Gb/s MegaRAID SAS Software User Guide
March 2014
C.8 Physical Drive Commands
Table 77 Physical Drive Commands
Description
Show drive information.
Start, stop, pause, resume, or
show the progress of a rebuild
operation.
Start, stop, pause, resume, or
show the progress of a
copyback operation.
Mark a drive as missing.
Show missing drive information. MegaCli -PdGetMissing
Replace the configured drive
that is identified as missing, and
then start an automatic rebuild.
Set the drive state to online
Set the drive state to offline.
Set the drive state to JBOD
Set the drive state to JBOD
Add and delete hot spare drives. MegaCli –PDHSP {–Set
Start, stop, pause, resume or
show the progress of an
initialization process.
MegaCLI Command
MegaCli -pdInfo
-PhysDrv[E0:S0,E1:S1,...]
-aN|-a0,1,2|-aALL
MegaCLI PDRbld -Start|-Stop
|-Suspend|-Resume|-ShowProg
|-ProgDsply -PhysDrv
[E0:S0,E1:S1,...]
-aN|-a0,1,2|-aALL
MegaCLI PDCpyBk -Start|-Stop
|-Suspend|-Resume|-ShowProg
|-ProgDsply -PhysDrv
[E0:S0,E1:S1,...]
-aN|-a0,1,2|-aALL
MegaCli -PdMarkMissing
-physdrv[E0:S0,E1:S1,...]
-aN|-a0,1,2|-aALL
-aN|-a0,1,2|-aALL
MegaCli -PdReplaceMissing
-physdrv[E0:S0] -arrayA, -rowB
-aN
MegaCli –PDOnline
-PhysDrv[E0:S0,E1:S1....]
-aN|-a0,1,2
MegaCli –PDOffline
-PhysDrv[E0:S0,E1:S1....]
-aN|-a0,1,2|-aALL
MegaCli –PDMakeGood
-PhysDrv[E0:S0,E1:S1....]
-aN|-a0,1,2|-aALL
MegaCli -PDMakeJBOD
-PhysDrv[E0:S0,E1:S1,...]
-aN|-a0,1,2|-aALL
[{-Dedicated -ArrayN
|-Array0,1...}] [-EnclAffinity]
[-nonRevertible] } | -Rmv
-PhysDrv[E0:S0,E1:S1,...]
-aN|-a0,1,2|-aALL
MegaCli –PDClear -Start |-Stop|
-ShowProg |-ProgDsply -
PhysDrv[E0:S0,E1:S1....]
-aN|-a0,1,2|-aALL
Appendix C: MegaCLI Commands to StorCLI Command Conversion
storcli /cx/ex/sx show
storcli /cx/ex/sx show all
storcli /cx/ex/sx start rebuild
storcli /cx/ex/sx stop rebuild
storcli /cx/ex/sx pause rebuild
storcli /cx/ex/sx resume rebuild
storcli /cx/ex/sx shnow rebuild
storcli /cx/ex/sx start copyback target =
exx:sxx
storcli /cx/ex/sx stop copyback
storcli /cx/ex/sx pause copyback
storcli /cx/ex/sx resume copyback
storcli /cx/ex/sx show copyback
storcli /cx/ex/sx set missing
storcli /cx/ex/sx show all
NOTE This information is shown as part of the show all
command.
storcli /cx/ex/sx insert array=x row=y
storcli /cx/ex/sx set online
storcli /cx/ex/sx set offline
storcli /cx/ex/sx set good [force]
storcli /cx/ex/sx set jbod
storcli /cx/ex/sx add hotsparedrive
[dgs=<N|0,1,2..>] enclaffinity
nonrevertible
storcli /cx/ex/sx delete hotsparedrive
storcli /cx/ex/sx start initialization
storcli /cx/ex/sx stop initialization
storcli /cx/ex/sx pause initialization
storcli /cx/ex/sx resume initialization
storcli /cx/ex/sx show initialization
LSI Corporation
- 394 -
Battery Commands
StorCLI Command