Monitoring Server Events; Monitoring Controllers - Lenovo ThinkServer RD650 User Manual
12 gb/s megaraid sas
Hide thumbs
Also See for ThinkServer RD650:
- User manual and hardware maintenance manual (262 pages) ,
- Operating system installation manual (122 pages) ,
- User manual (226 pages)
Table of Contents
Advertisement
12Gb/s MegaRAID SAS Software User Guide
March 2014
1.
On the Configure Alerts window, click the Alert Setting tab, the Mail Server tab, or the Email tab.
2.
Click Load Backup.
You are prompted to confirm your choice. The drive directory appears from which you can select a backup
configuration to load.
3.
Select the backup configuration file (it should be in .xml format).
4.
Click Open.
The drive directory disappears.
5.
Click OK.
The backup configuration is saved, and the Configure Alerts window closes.
10.14
Monitoring Server Events
The MegaRAID Storage Manager software enables you to monitor the activity of MegaRAID Storage Manager users in
the network.
When a user logs on/logs off from the application, the event message appears in the log displayed at the bottom of
the MegaRAID Storage Manager screen (the Vivaldi log/MegaRAID Storage Manager Log). These event message have
a severity level, a date and timestamp (User log on / log off time), and a brief description that contains a user name,
client IP address, an access mode (full/view only) and a client system time.
10.15
Monitoring Controllers
When the MegaRAID Storage Manager software is running, you can see the status of all the controllers in the left
panel. If a controller is operating normally, the controller icon looks like this:
circle appears next to the icon.
To display the complete controller information, click on a controller icon in the left panel of the MegaRAID Storage
Manager main menu. The controller properties appear in the right panel as shown in the following figure. Most of the
information on this tab is self-explanatory.
NOTE
If you choose to load a backup configuration and the Configure
Alerts window currently contains changes that have not yet been
saved as the current alert notification configuration, the changes will
be lost. You are prompted to confirm your choice.
LSI Corporation
- 302 -
Chapter 10: Monitoring Controllers and Their Attached Devices
. If a controller has failed, a small red
Monitoring Server Events
Advertisement
Table of Contents
