Converting Jbod Drives To Unconfigured Good Drives - Lenovo ThinkServer RD650 User Manual
12 gb/s megaraid sas
Hide thumbs
Also See for ThinkServer RD650:
- User manual and hardware maintenance manual (262 pages) ,
- Operating system installation manual (122 pages) ,
- User manual (226 pages)
Table of Contents
Advertisement
12Gb/s MegaRAID SAS Software User Guide
March 2014
Figure 48 Manage Preserved Cache
3.
Press Discard Cacheto discard the preserved cache from the virtual drive. A message box appears, asking you to
confirm your choice.
4.
Press OK to continue.
4.11
Converting JBOD Drives to Unconfigured Good Drives
You can convert multiple JBODs to Unconfigured Good drives (from the VD Mgmt screen) or you can convert a
particular JBOD drive to an Unconfigured Good drive (from the Drive Management screen).
Perform the following steps to convert multiple JBODs to Unconfigured Good drives:
1.
In the VD Mgmt screen, navigate to the controller, and press the F2 key.
2.
Navigate to Make Unconfigured Good, and press Enter.
The Convert JBOD to Unconfigured Good dialog appears, which shows all JBODs available in the system.
NOTE
The MegaRAID SAS 9240-4i and the MegaRAID SAS 9240-8i controllers
support JBOD.
LSI Corporation
- 75 -
Chapter 4: Ctrl-R Utility
Converting JBOD Drives to Unconfigured Good Drives
Advertisement
Table of Contents
