Managing And Changing Link Speeds - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
Figure 86 Save TTY Log
Follow these steps to save the TTY log entries to a file.
1. To select a different file system from the one listed in the File Systems field, highlight the current file system
name, and press Enter.
An error message appears if there is no file system.
2. Select a file system from the popup menu, and press Enter.
3. Highlight Select File System and press Enter.
4. To save the TTY log events file to a different directory from the one listed in the Directories field, highlight the
current directory name, and press Enter.
5. Select a directory name from the pop-up menu, and press Enter.
6. Highlight Select Directory, and press Enter.
7. To enter a different name for the TTY log file, highlight the current file name, and press Enter.
8. Type the new file name in the pop-up window, and press Enter.
9. To select how many TTY log entries to save, highlight the Entries to Save field, and press Enter.
10. Select an option from the popup menu, and press Enter.
Your choices are 2 KB, 4 KB, 8 KB, 16 KB, or All.
11. Highlight Save Log, and press Enter to save the log entries to the file.
5.4.9

Managing and Changing Link Speeds

The Manage Link Speed feature lets you change the link speed between the controller and an expander or between
the controller and a drive that is directly connected to the controller. The following dialog appears when you select
Manage Link Speed on the Advanced Controller Management dialog. The default settings for all phys is Auto.
LSI Corporation
- 122 -
Chapter 5: The HII Configuration Utility
Managing Controllers