Uninstalling The Snmp Package; Megaraid Storage Manager Remotely Connecting To Vmware Esx; Prerequisites To Running Megaraid Storage Manager Remote Administration - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
145.147.201.88:1234 testComm
#################################################
3. If in case, 'TrapDestInd' above is set to 1, IP addresses shall be taken from /etc/sma/snmp/snmpd.conffile in
the following format: 'com2sec snmpclient 172.28.157.149 public' 'Trapsink' and
'TrapCommunity' tokens are supported for sending customized SNMP traps
4. Start the LSI SAS SNMP Agent by entering the following command:
#/etc/init.d/lsi_mrdsnmpd start
7.6.5.7

Uninstalling the SNMP Package

The uninstall.sh script is located under the /etc/lsi_mrdsnmp/sas directory. Use the following command
to uninstall the package:
# cd /etc/lsi_mrdsnmp/sas 
# ./uninstall.sh
7.7

MegaRAID Storage Manager Remotely Connecting to VMware ESX

When the MegaRAID Storage Manager software is used to connect to a VMware ESX machine from a remote machine
(Windows /Linux), for long running operations (such as volume creation, deletion) to complete in a shorter time,
perform the following steps:
1. Login to the VMware ESX machine.
2. Open /etc/sfcb/sfcb.cfg.
3. Increase the keepaliveTimeout value from 1 to 100 or to a higher value.
4. Restart sfcbd ( /etc/init.d/sfcbd-watchdog restart).
5. Restart the MegaRAID Storage Manager Framework on the MegaRAID Storage Manager client machine.
For Windows – Restart the framework service.
—
For Linux – Restart the vivaldi framework service.
—
6. Relaunch the MegaRAID Storage Manager window.
7.8

Prerequisites to Running MegaRAID Storage Manager Remote Administration

The MegaRAID Storage Manager software requires ports 3071 and 5571 to be open to function. Follow these steps to
prepare to run the MegaRAID Storage Manager Remote Administration.
1. Configure the system with a valid IP address.
Make sure the IP address does not conflict with another in the sub network.
Ports, such as 3071 and 5571, are open and available for the MegaRAID Storage Manager framework
communication.
2. Disable all security manager and firewall.
3. Configure the multicasting.
NOTE Solaris also supports Custom community support.
NOTE In Solaris 11 x86, the file will be taken from
/etc/net-snmp/snmp/snmpd.conf.
MegaRAID Storage Manager Remotely Connecting to VMware ESX
LSI Corporation
- 226 -
Chapter 7: MegaRAID Storage Manager Overview and Installation