***MainBookTitle***
***ReleaseDate***
8.5
MegaRAID Storage Manager Main Menu
This section describes the MegaRAID Storage Manager main menu window:
***UNRESOLVED***
Properties and Graphical View Tabs
Event Log Panel
8.5.1
Dashboard / Physical View/ Logical View
The left panel of the MegaRAID Storage Manager window displays the Dashboard view, the Physical view, or the
Logical view of the system and the attached devices, depending on which tab is selected.
Dashboard View
The Dashboard view shows an overview of the system and covers the following features:
Properties of the virtual drives and the physical drives
—
Total capacity, configured capacity, and unconfigured capacity
—
Background operations in progress
—
The MegaRAID Storage Manager software features and their status (enabled or disabled)
—
Actions you can perform, such as creating a virtual drive and updating the firmware
—
Links to online help
—
Figure 124 MegaRAID Storage Manager Dashboard View
Physical View
The Physical view shows the hierarchy of physical devices in the system. At the top of the hierarchy is the system itself,
followed by the controller and the backplane. One or more controllers are installed in the system. The controller label
identifies the MegaRAID controller, such as the MegaRAID SAS 9260-8i controller, so that you can easily differentiate
between multiple controllers. Each controller has one or more ports. Drives and other devices are attached to the
ports. The properties for each item appear in the right panel of the screen.
***Confidentiality***
- 235 -
Chapter 8: MegaRAID Storage Manager Window and Menus
MegaRAID Storage Manager Main Menu