Installing Storcli On Microsoft Windows Operating Systems; Installing Storcli On Linux Operating Systems; Installing Storcli On Ubuntu Operating Systems - Lenovo ThinkServer RD650 User Manual

12Gb/s MegaRAID SAS Software User Guide
March 2014
SUSE Linux Enterprise Server 10 SP4 (32/64 bit)

SLES 11 SP3

Fedora Core Linux 15

Fedora 18

VMware® ESX 4.0

VMware ESX 4.1 U2

VMware ESXi 4.1 U2

VMware ESXi 5.0 U1

VMware 5.0 Update 2

VMware 5.1 Update 1

VMware OP

Solaris

Solaris SPARC

Solaris 11 Update 1 x86

FreeBSD

EFI

Citrix XenServer 6.1

6.4.1

Installing StorCLI on Microsoft Windows Operating Systems

The Windows StorCLI binary is provided in a binary format, and no separate installation is required.
1. Copy the binary file from the CD or from the LSI website.
2. Place the binary file in the directory from which you want to run the Storage Command Line Tool, and run
the tool.
Since Windows PowerShell is not fully supported by the StorCLI Tool, use either one of the following techniques
to run commands in the StorCLI Tool in Windows PowerShell:
enclose commands in double quotes. As an example,
—
storcli "/cx show"
launch the Command Prompt from within Windows PowerShell to run the StorCLI commands.
—
6.4.2

Installing StorCLI on Linux Operating Systems

To install StorCLI on Linux operating systems, perform the following steps:
1. Unzip the StorCLI package.
2. To install the StorCLI RPM, run the rpm -ivh <StorCLI-x.xx-x.noarch.rpm> command.
3. To upgrade the StorCLI RPM, run the rpm -Uvh <StorCLI-x.xx-x.noarch.rpm> command. command.
6.4.3

Installing StorCLI on Ubuntu Operating Systems

To install StorCLI on the Ubuntu operating systems, perform the following steps:
NOTE The LSISAS2208 and LSISAS2108 controllers provide support for
Microsoft Windows 8 and Microsoft Windows Server 2012 operating
systems.
NOTE StorCLI must be run with the administrator privileges.
LSI Corporation
- 156 -
Chapter 6: StorCLI
Installation