Make Unconfigured Good; Make Jbod; Managing Foreign Configurations - Lenovo ThinkServer RD650 User Manual
12 gb/s megaraid sas
Hide thumbs
Also See for ThinkServer RD650:
- User manual and hardware maintenance manual (262 pages) ,
- Operating system installation manual (122 pages) ,
- User manual (226 pages)
Table of Contents
Advertisement
12Gb/s MegaRAID SAS Software User Guide
March 2014
5.3.7.1
Make Unconfigured Good
Follow these steps to change the status of JBOD drives to Unconfigured Good.
1.
Highlight Make Unconfigured Good on the Configuration Management menu and press Enter.
The following dialog appears, listing information about the JBOD drives currently connected to the controller.
Figure 72 Make Unconfigured Good
Scroll down, if necessary, to view other drives listed in the dialog.
2.
Highlight each JBOD drive you want to make Unconfigured Good and press the spacebar to select it.
3.
Highlight OK (at the bottom of the JBOD drive list) and press Enter to convert the JBOD drives to Unconfigured
Good status.
5.3.7.2
Make JBOD
Perform these steps to change the status of Unconfigured Good drives to JBOD.
1.
Highlight Make JBOD on the Configuration Management menu and press Enter.
The Make JBOD dialog appears listing the Unconfigured Good drives currently connected to the controller.
2.
Highlight each drive you want to convert to JBOD status and press the spacebar to select it.
3.
Highlight OK and press Enter to convert the Unconfigured Good drives to JBOD status.
5.3.8
Managing Foreign Configurations
The following dialog appears when you select Manage Foreign Configuration from the Configuration
Management menu.
NOTE
If the controller supports JBOD drives, you can also change the status
of JBOD drives to Unconfigured Good when you create a new
configuration using the Create Configuration option.
LSI Corporation
- 107 -
Chapter 5: The HII Configuration Utility
Managing Configurations
Advertisement
Table of Contents
