Lenovo ThinkServer RD650 User Manual page 377

12Gb/s MegaRAID SAS Software User Guide
March 2014
B.3 Alarm Commands
Table 60 Alarm Commands
Description
Set alarm properties.
Show alarm properties.
B.4 Patrol Read and Consistency Check Commands
Table 61 Patrol Read and Consistency Check Commands
Description
Show patrol read status and
patrol read parameters, if any in
progress.
Set the patrol read options on a
single adapter, multiple
adapters, or all adapters (x =
single controller).
Show consistency check status,
if any in progress, and
consistency check parameters.
Set consistency check options
on a single adapter, multiple
adapters, or all adapters
(x = single controller).
3Ware CLI Command
/cx/ex/almx set
alarm=<mute|unmute|off>
NOTE The 3ware® controllers have enclosure alarms.
/cx/ex show alarms
NOTE This command applies for only 9750 and
9690SA controllers.
3ware CLI Command
/cx/ux show
/cx/ux start verify
/cx/ux set autoverify=<on|off>
/cx add verify=dddh:hh:duration
/cx/ux show
/cx/ux start verify
/cx/ux set autoverify=<on|off>
/cx add verify=ddd:hh:duration
NOTE The 3ware CLI combines both patrol read and consistency check into
a single command. The StorCLI has different commands for each.
Appendix B: 3ware CLI Commands to StorCLI Command Conversion
/cx set alarm=<on|off|silence>
NOTE The StorCLI controllers have controller alarms.
/cx show alarm
/cx show patrolRead
/cx set patrolread {=on
mode=<auto|manual>}|{off}
/cx set patrolread
[starttime=<yyyy/mm/dd hh [maxconcurrentp
d=<value>] [includessds=<on|off>]
[uncfgareas=on|off]
/cx set patrolread delay=<value>
/cx/vx show cc
/cx show ccrate
storcli /cx set
consistencycheck|cc=[off|seq|conc]
[delay=value] [starttime=yyyy/mm/dd hh] [
excludevd=x-y,z]
LSI Corporation
- 377 -
StorCLI Command
StorCLI Command