Replacing The Front Video Connector Assembly - Lenovo System x3550 M5 Installation And Service Manual

Four 3.5-inch hot-swap or simple-swap hard disk drive server configuration:
Figure 167. Front video connector assembly removal for four 3.5-inch hot-swap or simple-swap hard disk
drive server configuration
Step 6. If you are instructed to return the front video connector assembly, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.

Replacing the front video connector assembly

Use this information to replace the front video connector assembly.
To install the front video connector assembly, complete the following steps:
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 116.
Step 2. From inside the media cage, insert the front video connector assembly into the holes on the cage;
then, install the screws to secure the assembly to the cage.
Note: Refer to the illustration that applies to your particular server configuration.
246
Lenovo System x3550 M5 Installation and Service Guide
Video connector
Screws
Media cage