Lenovo System x3550 M5 Installation And Service Manual page 958

• W.3808002 An error occurred while saving UEFI settings to the IMM. Error Updating System
Configuration to IMM
Explanation:
Severity
Warning
User Response
Complete the following steps:
1. Use the Setup Utility to verify and save the settings (which will recover the settings).
2. Reset the IMM from the CMM.
3. Use CMM to remove auxiliary power from the compute node. This will reboot the compute node.
4. Check the Lenovo support site for an applicable service bulletin or firmware update that
applies to this error.
5. Update the IMM Firmware.
6. Use CMOS clear jumper to clear CMOS
7. (Trained service technician only) Replace the system board.
• W.3808003 Unable to retrieve the system configuration from the IMM. Error Retrieving System
Configuration from IMM
Explanation:
Severity
Warning
User Response
Complete the following steps:
1. Use the Setup Utility to verify and save the settings (which will recover the settings).
2. Reset the IMM from the CMM.
3. Use CMM to remove auxiliary power from the compute node. This will reboot the compute node.
4. Check the Lenovo support site for an applicable service bulletin or firmware update that
applies to this error.
5. Update the IMM Firmware.
6. Use CMOS clear jumper to clear CMOS
7. (Trained service technician only) Replace the system board.
• W.3818005 The CRTM flash driver could not successfully flash the staging area. The update
was aborted CRTM Update Aborted
Explanation:
Severity
Warning
User Response
Complete the following steps:
1. Continue booting the system. If system does not reset, manually reset the system.
944
Lenovo System x3550 M5 Installation and Service Guide