Lenovo System x3550 M5 Installation And Service Manual page 297

Step 15. Reconnect the power cords and any cables that you removed.
Step 16. Turn on the peripheral devices and the server.
Step 17. Start the Setup Utility and reset the configuration.
• Set the system date and time.
• Set the power-on password.
• Reconfigure the server.
See "Using the Setup Utility" on page 36 for more details.
Step 18. Either update the server with the latest RAID firmware or restore the pre-existing firmware from a
diskette or CD image.
Step 19. Update the UUID (see "Updating the Universal Unique Identifier (UUID)" on page 47).
Step 20. Update the DMI/SMBIOS (see "Updating the DMI/SMBIOS data" on page 49).
Step 21. Reactivate any Features on Demand features.
.
Chapter 5 Removing and replacing components
283