Lenovo System x3550 M5 Installation And Service Manual page 285

b. Align the installation tool with the microprocessor socket. The installation tool rests flush on
the socket only if properly aligned.
Figure 201. Installation tool alignment
c. Install the microprocessor using the following instructions for your installation tool.
• When using the installation tool, twist the handle of the installation tool assembly
counterclockwise until the microprocessor is inserted into the socket, and lift the installation
tool out of the socket.
Figure 202. Installation tool handle adjustment
Handle
Microprocessor
Chapter 5
Installation tool
.
Removing and replacing components
271