Replacing the LCD system information display panel
Use this information to replace the LCD system information display panel.
To install the LCD system information display panel, complete the following steps:
Note: The LCD system information display panel is available only on the eight 2.5-inch-drive server model
with the advanced media cage.
Step 1.
Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 116.
Step 2.
Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3.
1
Pull the tab on the LCD retention bracket to the left to disengage the retention bracket.
the retention bracket to remove it from the server.
Figure 179. Retention bracket removal
1
Media cage
Retention bracket
.
Chapter 5
Removing and replacing components
2
Rotate
255