Figure 106. Adapter installation into a PCI riser-card assembly that has one low-profile slot for ML2 card (for
PCI riser-card assembly connector 1 on system board)
Figure 107. Adapter installation into a PCI riser-card assembly that has one low-profile slot (for PCI riser-card
assembly connector 2 on system board)
Adapter
Figure 108. Adapter installation into a PCI riser-card assembly that has two low-profile slots (for PCI riser-card
assembly connector 2 on system board)
Adapter
Adapter
Expansion
filler
Chapter 5
Expansion
filler
Expansion
filler
Expansion
filler
Adapter
.
Removing and replacing components
183