Chapter 4: Design Flow Steps; Customizing And Generating The Core - Xilinx SMPTE 2022-5/6 Product Manual

Design Flow Steps
This chapter describes customizing and generating the core, constraining the core, and the
simulation, synthesis and implementation steps that are specific to this IP core. More
detailed information about the standard Vivado® design flows in the IP Integrator can be
found in the following Vivado Design Suite user guides:
• Vivado Design Suite User Guide: Designing IP Subsystems using IP Integrator (UG994)
[Ref 11]
• Vivado Design Suite User Guide: Designing with IP (UG896)
• Vivado Design Suite User Guide: Getting Started (UG910)
• Vivado Design Suite User Guide: Logic Simulation (UG900)

Customizing and Generating the Core

The core is configured to meet the developer's specific needs before instantiation through
the Vivado IDE. This section provides a quick reference to parameters that can be
configured at generation time.
LogiCORE IP SMPTE 2022-5/6 RX v4.0
PG033 October 1, 2014
www.xilinx.com
Chapter 4
[Ref 6]
[Ref 8]
[Ref 7]
Send Feedback
40