9406 Model 250 System Unit; Power And Packaging - IBM i series Handbook

iSeries Model 250 Packages and AS/400e Server 250
• #2723/#9723 PCI Ethernet IOA
• #2724/#9724 PCI 16/4 Mbps Token Ring IOA
• #2838/#9738 PCI 100/10 Mbps Ethernet IOA
There can only be one #2838/#9738 on each #2866 Integrated Netfinity Server. An external
cable is included to enable connectivity to Integrated Netfinity Server hardware (keyboard,
mouse), which also allows for optional use of parallel and serial ports.
If running Microsoft Windows NT on the Integrated Netfinity Server, these additional features
are required:
• #0325 IPCS Extension Cable for Windows NT (orderable)
• #1700 IPCS Keyboard/Mouse for Windows NT (default in some countries and
orderable in others)
• A display unit must be connected to the Integrated Netfinity Server to support
Windows NT
• A minimum of 64M IOP memory on the Integrated Netfinity Server
For keyboard/mouse and display support in countries outside the USA, consult the Internet
at:
http://www.as400.ibm.com/windowsintegration/ntins.htm

9406 Model 250 System Unit

Power and Packaging

The base system contains a planar, which combines both the processor and MFIOP in one
card. The Base Disk Controller (CCIN 9728) is embedded on the backplane. The MFIOP
provides support for two low speed PCI card slots and one high speed PCI card slot (used for
the optional disk controller). It also drives one Integrated Netfinity Server (#2866) or one
additional high speed slot.
106
iSeries Handbook