On-Site Installation; Lifting Robot With Roundsling - ABB IRB 1600 - 5/1,2 type A Product Manual

2.3 On-site installation

2.3.1. Lifting robot with roundsling

Recommended lifting position
The figure below shows the recommended lifting positions. It is important that the roundsling
has free space and does not wear against any part of the robot.
xx0400001296
Required equipment
Equipment
Overhead crane
Roundsling
Lifting the robot with roundsling
3HAC026660-001 Revision: C
A - A
A
A
Action
1. Move the robot to an appropriate lifting
position.
2. Secure the roundsling safely at the lifting eye
and at the overhead crane.
Make sure the roundsling has free space and
does not wear against any part of the robot.
2 Installation and commissioning
2.3.1. Lifting robot with roundsling
A
A
Art. no. Note
- Lifting capacity: 500 kg.
- Length: 2 m.
Lifting capacity: 500 kg.
Note
Shown in the figure
lifting position on page
Capacity for the roundsling is specified
in Required equipment on page
Attachment is shown in the figure
Recommended lifting position on page
45.
A
A
Recommended
45.
45.
Continues on next page
45