2.4.4. Installation of additional mechanical stops on axis 3
General
This section details how to install an additional mechanical stop on axis 3 in order to restrict
the working range of the axis.
Restrictions in working range
The working range of axis 3 can be restricted into two different working areas, as shown in
the two figures below. Notice the differences between the different models.
xx0400001283
-
A
B
3HAC026660-001 Revision: C
2.4.4. Installation of additional mechanical stops on axis 3
Robot models IRB 1600 - x/1.2
Working range A
Working range B
2 Installation and commissioning
Continues on next page
73