Standard Toolkit - ABB IRB 1600 - 5/1.2 Product Manual

6 Reference information

6.6. Standard toolkit

6.6. Standard toolkit
General
All service (repairs, maintenance and installation) procedures contain lists of tools required
to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools that are
considered standard are gathered in the Standard toolkit and defined in the table below.
This way, the tools required are the sum of the Standard Toolkit and any tools listed in the
instruction.
Contents, standard toolkit
Qty
1
1
1
1
1
1
1
1
1
1
1
194
Tool
Ring-open-end spanner 8-19 mm
Socket head cap 2.5-17 mm
Torx socket no: 20-60
Torque wrench 10-100 Nm
Small screwdriver
Plastic mallet
Ratchet head for torque wrench 1/2
Socket head cap no: 5, socket 1/2" bit L 20 mm
Socket head cap no: 6, socket 1/2" bit L 20 mm
Socket head cap no: 8, socket 1/2" bit L 20 mm
Small cutting plier
3HAC023637-001 Revision: B