Configuring Tftp Options - Cisco 7902G Administration Manual

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Using the Phone's Network Configuration Screen (Cisco Unified IP Phone 7905G and 7912G)
Step 1
Step 2
Step 3
Step 4
Step 5

Configuring TFTP Options

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Procedure
Display the Network Configuration menu.
For instructions, see the
on page 4-5.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to VLAN Enabled.
If VLAN is enabled, the option appears as
VLAN Enabled YES
Press the No softkey to disable VLAN.
Press Save.
If you do not use DHCP to direct the Cisco Unified IP Phone to a TFTP server,
you must manually assign one. You can also assign an alternative TFTP server to
use instead of the one assigned by DHCP. On the Cisco Unified IP Phone 7902G,
you can manually enable or disable TFTP.
This section covers these topics:
Assigning a TFTP Sever, page 4-32
•
Enabling an Alternate TFTP Server, page 4-33
•
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-6.
Configuring TFTP Options
4-31