Cisco 7902G Administration Manual page 100

Configuring IP Settings
Using the Phone Configuration Web Page (Cisco Unified IP Phone 7902G, 7905G, and 7912G)
Step 1
Step 2
Step 3
Using the Phone's Network Configuration Screen (Cisco Unified IP Phone 7905G and 7912G)
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
4-24
Procedure
Display the Phone Configuration web page.
For instructions, see the
Configuration Web Page" section on page
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
To set the subnet mask, enter an address in the StaticNetMask field and click
Apply.
On the Cisco Unified IP Phone 7902G, you can also review phone settings using
the IVR system. For more information, see
Voice Response (IVR) System on the Cisco Unified IP Phone 7902G."
Procedure
Display the Network Configuration menu.
For instructions, see the
on page 4-5.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to Subnet Mask.
Press the Edit softkey.
Enter the new IP address.
For information about entering values, see the
the Network Configuration Menu" section on page
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
"Accessing Network Settings through a Phone
4-3.
Appendix B, "Using the Interactive
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-6.
"Guidelines for Editing Settings in
4-7.
OL-8151-01