Cisco 7902G Administration Manual page 46

Understanding the Requirements for Installing and Configuring the Cisco Unified IP Phone 7902G, 7905G, and 7912G
Table 1-2 Overview of Configuration Procedures for the Cisco Unified IP Phone
Required Task
1. Gather the following
information about the phone for
use in Cisco Unified CallManager
Administration:
Information requested in
•
the Device Information
fields, if applicable, such
as the device pool and
calling search space.
The Cisco Unified
•
CallManager user to
associate with the phone.
The number of lines and
•
associated directory
numbers to assign to the
phone
Features to be added and
•
configured for the phone.
2. Configure routers, gateways,
and switches to handle voice
communication.
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
1-14
Chapter 1
Purpose
You will refer to this information
when using the
Cisco Unified CallManager
Administration Phone
Configuration web page to
configure a phone.
The Device Information fields on
this page will auto-populate if
information is relevant and
available. Edit fields if you want to
override system settings on a
per-device basis.
Establishes the infrastructure for
the IP telephony network.
An Overview of the Cisco Unified IP Phone
For More Information
See the "Adding Phones to
the
Cisco Unified CallManager
Database" section on
page 2-9.
See the "Configuring
Telephony Features Using
Cisco Unified CallManager
Administration" section on
page 5-2.
Refer to
Cisco Unified CallManager
System Guide.
Refer to
Cisco Unified CallManager
Administration Guide.
See the "Understanding
How the
Cisco Unified IP Phone
Interacts with the
Cisco Catalyst Family of
Switches" section on
page 2-3 and the
documentation included
with these devices.
OL-8151-01