Appendix A
Additional Configuration Methods and Parameters
Procedure
Display the Phone Configuration web page.
Step 1
For instructions, see the
Configuration Web Page" section on page
From the phone's web page, choose the hyperlink for the information that you
Step 2
want to display or configure:
•
•
•
•
•
•
•
If you selected Network Parameters, Tone Parameters, or Audio Parameters,
Step 3
follow these steps:
a.
b.
Close your web browser.
Step 4
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
"Accessing Network Settings through a Phone
Device Information—Display only. For more information, see the
Information" section on page
Network Configuration—Display only. For more information, see the
"Network Configuration" section on page
Network Statistics—Display only. For more information, see the
Statistics" section on page
Device Logs—Display only. For more information, see the
section on page
A-14.
Network Parameters—Configurable parameters. For more information, see
the
Table A-4"Network Parameters" section on page
Tone Parameters—Configurable parameters. For more information, see the
Table A-4"Tone Parameters" section on page
Audio Parameters—Configurable parameters. For more information, see the
Table A-4"Audio Parameters" section on page
If you have set up a password with the UIPassword parameter in the profile
file, enter the password in the UIPassword field, and then click Apply. (If you
want to change the password, enter the new password in the two
ChangeUIPassword fields before clicking Apply.)
Make changes to parameters in the Network Parameters, Tone Parameters,
and Audio Parameters areas as needed and lick Apply to save your changes.
4-3.
A-9.
A-10.
A-13.
A-20.
A-20.
Web Page Configuring
"Device
"Network
"Device Logs"
A-15.
A-7