Configuring Tftp Options; Assigning A Tftp Sever - Cisco 7960 Administration Manual

Chapter 5 Configuring Network Settings on the Cisco IP Phone
Step 8
Step 9
Cisco IP Phone 7910
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Configuring TFTP Options

Assigning a TFTP Sever

Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Press Validate.
Press Save.
Procedure
Press settings.
Press 6 (Network Configuration).
Use the down volume key to select Admin VLAN ID setting.
Press * to edit.
Use the buttons on the dial pad to enter the new Admin VLAN ID, using the down
arrow to backspace.
Press # to save.
If you do not use DHCP to direct the Cisco IP Phone 7960 to a TFTP server, you
must manually assign one. You can also assign an alternative TFTP server to use
instead of the one assigned by DHCP.
This section covers these topics:
Assigning a TFTP Sever, page 5-21
•
Using an Alternate TFTP Server, page 5-23
•
The default TFTP server is set to CiscoCM1. If you are not using DHCP in your
network, and you want to change this setting, you must manually assign the TFTP
server to the phone.

Configuring TFTP Options

5-21