Erasing the Local Configuration
Cisco Unified IP Phone 7905G/7912G
Step 1
Step 2
Erasing the Local Configuration
Caution
Cisco Unified IP Phone 7902G
Step 1
Step 2
Step 3
Step 4
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
7-16
Procedure
Press **#** to reset the Cisco Unified IP Phone.
The phone displays "Do you want to reboot the phone?"
Press the Yes softkey.
The phone cycles through normal startup procedures.
If you want to erase all locally stored configuration options, you can erase the
configuration and restore settings to their default values, including enabling
DHCP.
Erasing the local configuration removes all user-defined changes, except ringer
sound, made locally on the Cisco Unified IP Phone. If you choose this option,
these settings are set back to their default values.
Procedure
Lift the handset, then press and hold the Menu button for approximately
3 seconds.
Press # to go to the extended menu.
Enter the code # 322873738.
Hang up the phone. The phone resets.
Chapter 7
Troubleshooting the Cisco Unified IP Phone
OL-8151-01