Configuring Tftp Options - Cisco 7920 Administration Manual

Chapter 5 Configuring Network Settings on the Cisco Wireless IP Phone 7920
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10

Configuring TFTP Options

Step 1
Step 2
Step 3
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Scroll to Static Settings and press Select.
The Static Settings menu options display.
Scroll to Primary DNS Server, then press Select.
Press the Edit softkey.
Enter or modify the IP address.
For information about entering values, see the
the Network Configuration Menu" section on page
Scroll to Secondary DNS Server, then press Select.
Press the Edit softkey.
Enter or modify the IP address.
Press Back to return to the Static Settings options.
Related Topics
Displaying the Network Configuration Menu, page 5-2
•
• Guidelines for Editing Settings in the Network Configuration Menu, page 5-3
Viewing the Current Configuration, page 5-6
•
• Configuring TFTP Options, page 5-13
Viewing the Media Access Control (MAC) Address, page 5-14
•
If you use DHCP to direct the Cisco IP Phones to a TFTP server, you can also
assign an alternative TFTP server to some phones instead of the one assigned by
DHCP. To assign a TFTP server to a phone, use the following steps.
Procedure
Press the Menu softkey.
Choose Network Config > TFTP Option
To use DHCP to assign a TFTP server IP address, scroll to Use DHCP or
Verifying or Entering Network Settings
"Guidelines for Editing Settings in
5-3.
5-13