Creating Or Updating A Profile File; Profile File Conventions - Cisco 7902G Administration Manual

TFTP Configuring

Creating or Updating a Profile File

Profile File Conventions

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
A-4
Related Topic
Creating or Updating a Profile File, page A-4
•
Use the file example_uprofile.txt or an existing text profile file as a template for
creating a text version of a Cisco Unified IP Phone profile file.
A text profile file must conform to the following conventions:
The characters #txt must appear at the beginning of the first line of the file so
•
that the formatting tool, cfgfmt.exe, will treat the file as a text file
A pound sign (#) at the beginning of a line indicates a comment
•
Parameter/value pairs are entered in the form parameter:value, where
•
parameter is the exact name of the parameter and value is a valid value
Each parameter/value pair must appear on a its own line
•
All parameter/value pairs are optional, but the
•
Cisco Unified IP Phone 7902G and 7905G might not function properly if
some values are missing.
A parameter value is one of the following types:
•
Alphanumeric string
–
Numeric digit string
–
Array of short integers
–
IP address (for example, 192.168.2.170)
–
– Extended IP address—IP address with port (for example,
192.168.2.170.9001)
Boolean (1 or 0)
–
Bitmap—unsigned hexadecimal integer (for specifying bits in 32-bit
–
integer)
Integer (32-bit integer)
–
Appendix A Additional Configuration Methods and Parameters
OL-8151-01