Viewing Network Statistics - Cisco 7902G Administration Manual

Chapter 6 Viewing Status, Statistics, Model and Firmware Information on the Cisco Unified IP Phone
Step 1
Step 2

Viewing Network Statistics

Step 1
Step 2
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Procedure
Press the Menu button.
Choose Settings > Status > Status Messages.
The phone displays the name of the configuration file in the following format:
SEPDefault.cnf.xml or SEPmacaddress
To exit the Status screen, press the Exit softkey.
Related Topics
Adding Phones to the Cisco Unified CallManager Database, page 2-9
•
Configuring IP Settings, page 4-20
•
Modifying DHCP Settings, page 4-15
•
Configuring TFTP Options, page 4-31
•
The Network Statistics screen on the Cisco Unified IP Phone 7905G and 7912G
provides information about the phone and network performance.
Procedure
Press the Menu button
Choose Settings > Status > Network Statistics.
Use the Navigation button to display the information in the Network Statistics
screen.
Table 6-2 describes the items that appear in this screen.
To reset the Rcv, Xmt, REr, and BCasts statistics to 0, press the Clear softkey.
To exit the Network Statistics screen, press the Exit softkey.
Viewing Network Statistics
6-3