Tftp Configuring - Cisco 7902G Administration Manual

Appendix A Additional Configuration Methods and Parameters
Table A-1 Cisco Unified IP Phone Profile File Naming Conventions
Cisco Unified Phone-Specific
IP Phone Profile File
Model Name
7902G ffxxxxxxxxxxxx
7905G ldxxxxxxxxxxxx lddefault.cfg
7912G gkxxxxxxxxxxxx gkdefault.cfg
Note
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Table A-1 explains how these profile files are named.
Common
Profile File
Name
ffdefault.cfg
You can edit a profile file in text format on the TFTP server and then convert it to
the binary format required by the phone. See the
File" section on page A-4
Configuration parameters are entered in the format "Parameter:value." For
example, the following entry specifies that the password for accessing a phone's
web page or Network Configuration screen is 12345: UIPassword:12345. See the
"Configuration Parameters" section on page A-15
parameters and values.
Use the file example_uprofile.txt as a template for creating the text version of
your Cisco Unified IP Phone profile files. You can obtain the latest version of this
file from the CCO website. It is included with the SCCP Software Package Zip
file.
A profile file for your phone may contain some parameters that are not described
in this manual. These parameters are reserved for future use or are configured with
factory default settings and should not be changed.
Phone-Specific Profile Name Notes
Each xx is the two-digit lowercase
•
hexadecimal representation of each integer in
the phone's MAC address
The file name must be exactly 14 characters
•
For the Cisco Unified IP Phone 7905G and
•
7912G, the profile file names begin with a
lowercase "L" followed by a lowercase "D"
For example, if the MAC address is
•
0.1.45.2.10.20, the file name is
ld00012d020a14
for more information.

TFTP Configuring

"Creating or Updating a Profile
for more information about
A-3