Audio Parameters - Cisco 7902G Administration Manual

Appendix A Additional Configuration Methods and Parameters
Table A-7

Audio Parameters

Parameter Description
AudioMode Allows control of
audio-related functions.
ConnectMode Connection mode of the
protocol used by the
Cisco Unified IP Phone.
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Usage
Bit map, as follows:
Bit 0—Reserved for future use.
•
Bit 1—If 0, use G.711 codec only; do not use
•
low-bit-rate codec. If 1, use both G.711 and
low-bit-rate codec.
Bits 2–31—Reserved for future use.
•
Bit map, as follows:
Bit 0–29—Reserved for future use. Must be set
•
to 0.
Bit 30—If 1, enable Cisco IOS Telephony
•
Solution (ITS) support to handle the differences
between Cisco Unified CallManager and Cisco
ITS. Cisco ITS runs on an IOS router and is a
subset of Cisco Unified CallManager. If you
have Cisco ITS, refer to the documentation for
that product.
• Bit 31—If 1, enable downloading and
processing of .cnf.xml configuration file
information sent by
Cisco Unified CallManager.
Configuration Parameters
A-21