Cisco 7902G Administration Manual page 190

To change the graphic that appears on a Cisco Unified IP Phone, follow these
steps:
Procedure
Open a command window and type the following command:
Step 1
bmp2logo imageID image .bmp image .logo
where:
•
•
For example, if the image identifier is 10 and the base name of your image file is
mylogo, type this command:
bmp2logo 10 mylogo.bmp mylogo.logo
Copy the image.logo file to the TFTPPATH directory on the TFTP server.
Step 2
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
F-2
Appendix F
imageID is a unique identifier for the new graphic. This identifier must be a
number from 0 through 4294967296 and must be different than the identifier
of the graphic that is currently on the phone.
image is the base file name of the image that you previously created and saved
with the graphics program.
The imageID of the image that comes with the phone is 1.
Note
Changing the Graphic on the Cisco Unified IP Phone LCD Screen
OL-8151-01