Creating Custom Phone Rings; Configuring The Corporate Directory - Cisco 7902G Administration Manual

Creating Custom Phone Rings

Creating Custom Phone Rings
Note

Configuring the Corporate Directory

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
5-8
You can customize the phone ring types available on the Cisco Unified IP Phone
7905G and 7912G at your site by using a set of phone ring sounds that are
provided by Cisco Unified CallManager or by creating your own pulse code
modulation (PCM) files and editing the Ringlist.xml file.
Refer to Cisco Unified CallManager Features and Services Guide for more
information.
The Cisco Unified IP Phone 7905G and 7912G can be configured with up to 24
ring tones.
From the Cisco Unified IP Phone 7905G and 7912G, users can look up directory
numbers for their co-workers. To support this feature, you must first configure
corporate directories
Cisco Unified CallManager uses a Lightweight Directory Access Protocol
(LDAP) directory to store authentication and authorization information about
users of Cisco Unified CallManager applications that interface with
Cisco Unified CallManager. Authentication establishes the users' rights to access
the system. Authorization identifies the telephony resources that a user is
permitted to use, such as a specific telephone extension.
To install and set up these features, refer to Installing and Configuring the
Cisco Customer Directory Configuration Plugin. That manual guides you through
the configuration process for integrating Cisco Unified CallManager with
Microsoft Active Directory and Netscape Directory Server.
After the LDAP directory configuration completes, users can use the Directories
menu on the Cisco Unified IP Phone 7905G and 7912G to look up users in the
corporate directory.
Chapter 5 Configuring Features, Services, and Users
OL-8151-01