Cisco 7902G Administration Manual page 80

Accessing Network Settings through a Phone Configuration Web Page
To access the Phone Configuration web page for a phone, follow these steps:
Procedure
Open a web browser and enter the following URL, where IPaddress is the IP
Step 1
address of your phone:
http://IPaddress
Step 2
On the Cisco Unified IP Phone 7902G, you can determine the IP address through
the IVR system, menu option 21. For more information, see
the Interactive Voice Response (IVR) System on the
Cisco Unified IP Phone 7902G."
On the Cisco Unified IP Phone 7905G and 7912G, you can determine the IP
address by pressing the Menu button, choosing Settings > Network
Configuration, and then scrolling to IP Address.
For example, the Phone Configuration web page for a Cisco Unified IP Phone
with the IP address 192.168.3.225 is http://192.168.3.225
Press Enter.
Step 3
The Phone Configuration web page appears.
You can control whether a phone's web pages can be accessed. For more
Note
information, see the
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
4-4
Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
"Disabling Web Page Access" section on page
Appendix B, "Using
A-8.
OL-8151-01