Cisco 7902G Administration Manual page 85

Chapter 4 Configuring Network Settings on the Cisco Unified IP Phone
Using the Phone's Network Configuration Screen (Cisco Unified IP Phone 7905G and 7912G)
Step 1
Step 2
Table 4-2 Network Settings
Network Setting
DHCP Server
BootP Server
MAC Address
Host Name
Domain Name
IP Address
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
On the Cisco Unified IP Phone 7902G, you can also review phone settings using
the IVR system. For more information, see
Voice Response (IVR) System on the Cisco Unified IP Phone 7902G."
Procedure
Display the Network Configuration menu.
For instructions, see the
on page 4-5.
Scroll through the options to display the settings described in
Description
Displays IP address of the Dynamic
Host Configuration Protocol (DHCP)
server that the phone uses to obtain IP
address.
Indicates whether the phone obtains its
configuration from a Bootstrap Protocol
(BootP) server rather than a DHCP
server.
Identifies the unique Media Access
Control (MAC) address of the phone.
Identifies the unique host name
assigned to the phone.
Identifies the name of the Domain
Name System (DNS) domain in which
the phone resides.
Indicates the Internet Protocol (IP)
address of the phone.
Appendix B, "Using the Interactive
"Displaying the Network Configuration Menu" section
Verifying Network Settings
Table 4-2.
Usage Notes
See the "Modifying DHCP
Settings" section on page
Always displays No.
Cannot be configured.
Cannot configure.
Obtained from the DHCP
server.
See the "Assigning a Domain
Name" section on page
See the "Assigning an IP
Address" section on page
4-15.
4-25.
4-20.
4-9