To Save A Trace To A File - Agilent Technologies 35670A Quick Start Manual

Agilent 35670A Quick Start Guide

To save a trace to a file

1
Activate the trace if the one you want to save is not currently active. See
"To select the active trace" in the Working with the Display section.
2
Press [ ] [
Save/Recall
SAVE DATA
3
Type a file name, then press [
or
Use the default name.
After you have entered a file name the analyzer saves the active trace to a file on the
default disk. The analyzer automatically increments the default file name during
successive save operations. For more information on typing a file name and selecting
the default disk, see "To type a text string" and "To select the default disk" earlier in
this book.
To save a trace to a data register, repeat step 2 except press one of the data register
softkeys, rather than the [
] [ ] [
SAVE TRACE INTO FILE
].
ENTER
] softkey.
INTO FILE
Saving and Plotting Data
].
49