To Change Parameters Using The Measurement State - Agilent Technologies 35670A Quick Start Manual

Working with the Display

To change parameters using the measurement state

1
To stop a measurement, press [
2
Press [ ] [
Disp Format
3
Using the knob, move the cursor to the field you wish to change.
4
Use the up-arrow or down-arrow keys to step through the available values for that
field.
or
Press <number> <unit>.
5
Press [ ].
Pause-Cont
6
Press [ ] and the appropriate trace-display format softkey.
Disp Format
As you select parameter values, the analyzer may change other parameters to their
default value. It is best to start at the top of the list and work your way down.
Pausing the measurement while you change the measurement state, allows the process
to go faster.
Use the arrow keys to step through values
24
].
Pause-Cont
].
MEASURMNT STATE
Turn the knob to select the field
Agilent 35670A Quick Start Guide