To Measure Harmonic Distortion - Agilent Technologies 35670A Quick Start Manual
Fft dynamic signal analyzer
Hide thumbs
Also See for 35670A:
- Manual (796 pages) ,
- Service manual (439 pages) ,
- Operator's manual (322 pages)
Table of Contents
Advertisement
Making Measurements
To measure harmonic distortion
In addition to measuring harmonic distortion, this task measures the frequency and
amplitude of the fundamental frequency.
1
Initialize the analyzer.
Press [
] [
Preset
DO PRESET
2
Connect the signal source as shown in the illustration.
3
Select the measurement parameters.
Press [
] [
] <number> <unit>, then
Freq
START
press [
] <number> <unit>.
STOP
Press [
].
Window
Press [
].
HANN
or
Press [
].
FLAT TOP
4
Specify the triggering and averaging parameters.
Press [
] [
Trigger
CHANNEL 1 2 3 4
press [
TRIGGER SETUP
Press [
], then press [
Avg
38
].
] to highlight 1, then
] [
], <number> <unit>.
CHANNEL LEVEL
] to highlight ON.
AVERAGE ON OFF
Agilent 35670A Quick Start Guide
Channel 1
Channel 2
Hide quick links:
Advertisement
Table of Contents
