Agilent Technologies 35670A Quick Start Manual page 51

Agilent 35670A Quick Start Guide
4
Configure the display.
Press [ ], then press[
Scale
Press [ ] [
Disp Format
MORE
5
Measure the DUT.
Press [ ].
Start
If you want to use a linear X-axis for the logarithmic sweep:
Press [ ] then press[
Trace Coord
If the overload indicator (as shown in the illustration) flashes, the analyzer is
autoranging to provide the best signal-to-noise ratio.
] to highlight
AUTOSCALE ON OFF
] [ ].
BODE DIAGRAM
] to highlight
X-AXIS LIN LOG
Overload indicator flashes when
analyzer is autoranging
Making Measurements
.
ON
.
LIN
33