Agilent Technologies 35670A Quick Start Manual page 63

Agilent 35670A Quick Start Guide
3
Specify the measurement parameters.
Press [ ] [
Input
XDCR UNIT CH1 SETUP
Press [
XDCR UNIT ON OFF
Press [
XDCR SENSITVTY
Press [
XDCR UNIT LABEL
4
Configure the display.
Press [ ] [
Trace Coord
Press [ ], then press[
Scale
highlight OFF.
Press [ ] [
Trace Coord
Press [
AMPLITUDE PK PP RMS
Press [ ].
EU
Press [
Display Format
highlight ON.
Press [ ] to highlight ON.
SKEW ON OFF
5
Measure the DUT.
Press [ ].
Start
If you turn on the ICP current source in Step 2, AC coupling is automatically engaged
to maximize dynamic range and minimize distortion. Allow approximately 30
seconds for time to charge the AC/DC capacitor and for the input range to stabilize.
].
] to highlight ON.
] <number> <unit>.
] [ ] [ ].
Rtn
g
].
LOG MAGNITUDE
] to highlight ON, then press it again to
AUTOSCALE ON OFF
].
Y UNITS
] to highlight PK.
] [ ], then press [
WATERFALL SETUP
Making Measurements
] to
WATERFALL ON OFF
45