Agilent 35670A Quick Start Guide
To activate the input channels-Option AY6
1
].
2
highlight
for a single channel measurement.
1
3
If you want to make Channel 3 the reference channel to Channel 4, press [
.
1,3
1,3
This selection must be made before the measurement is started. If you change the
number of input channels, you must restart the measurement. At preset, the analyzer is
set to measure with two channels.
Channel 1 is the default reference channel. If you want to use channel pairs, set
Channel 3 as the reference to Channel 4. Channel 1 remains the reference to
] to highlight
for a four channel measurement. Press it again to
4
The Basics
REF CHANS 1
Overload Indicator
Half Range Indicator
7