To Activate The Input Channels; Press [ Inst Mode ]. 2 Press - Agilent Technologies 35670A Quick Start Manual

The Basics

To activate the input channels

1
Press [ ].
Inst Mode
2
Press [ ] to highlight
CHANNELS 1 2
This selection must be made before the measurement is started. If you change the
number of input channels, you must restart the measurement. At preset, the analyzer is
set to measure with two channels.
Channel 1 is the reference channel for measurement results that require data for
two channels.
6
Agilent 35670A Quick Start Guide
for a one channel measurement.
1
Overload Indicator
Channel 2
Half Range Indicator
Channel 1