To Execute A Recorded Measurement Sequence - Agilent Technologies 35670A Quick Start Manual

Automating Measurements

To execute a recorded measurement sequence

1
Press [ ].
Basic
2
Press [
RUN PROGRAM 1
or
Press [
RUN PROGRAM 2
or
Press [
RUN PROGRAM 3
or
Press [
RUN PROGRAM 4
or
Press [
RUN PROGRAM 5
This task runs the program currently loaded in the selected program buffer. To run the
program in the active program buffer, press [
[ ].
RUN PROGRAM
If your program is stored on one of the analyzer's disks, you will need to load it into
the active program buffer before running it. (You can recall programs with the
[ ] softkey, located in the [
RECALL PROGRAM
Once your program is running, you can stop it by pressing one of three keys:
•
Press [ ] to PAUSE the program.
Basic
•
Press [ ] to ABORT the program.
Local/GPIB
•
Press [ ] to ABORT the program. To preset the analyzer, press [
Preset
See Using Instrument BASIC with the Agilent 35670A for more information on
pausing and stopping a program.
58
].
].
].
].
].
Basic
Save/Recall
Agilent 35670A Quick Start Guide
] [ ]
INSTRUMNT BASIC
] menu.
DO PRESET
].