To Select An Instrument Mode - Agilent Technologies 35670A Quick Start Manual

The Basics

To select an instrument mode

1
Press [ ].
Inst Mode
2
Press [ ].
FFT ANALYSIS
or
Press [
OCTAVE ANALYSIS
(Option 1D1 only).
or
Press [
ORDER ANALYSIS
or
Press [ ] to select Swept Sine Measurements (Option 1D2 only).
SWEPT SINE
or
Press [
CORRELATN ANLYSIS
or
Press [
HISTOGRAM/TIME
The analyzer can make measurements that fall into six broad categories, some
available as special options. These categories are called instrument modes.
You should select an instrument mode before specifying other measurement
parameters. Instrument modes are not coupled. Parameters set in one instrument
mode are independent of parameters set in the other modes.
For more information on the six instrument modes, use online help.
8
] to select Realtime Octave Measurements
] to select Computed Order Tracking (Option 1D0 only).
].
] to select histograms and time domain.
Agilent 35670A Quick Start Guide