Working with the Display
To select measurement data
1
Select the active traces. (See "To select the active trace," the first task in this section.)
2
Press [
].
Meas Data
3
Press [
]
CHANNEL 1 2
or
Press [
CHANNEL 1 2 3 4
selections as you press [
4
Press one of the measurement data softkeys. The [
another menu of measurement data selections.
If measurement data is not available, its softkey label is ghosted (displayed using
half-bright characters). The availability of trace data is limited by:
•
your selection of instrument mode (See "To select an instrument mode" in the first
section.)
•
the number of active channels
20
] (option AY6). The analyzer steps through the channel
].
CHANNEL 1 2 3 4
Agilent 35670A Quick Start Guide
] softkey displays
MORE CHOICES